Structural Glazing Tape
FIANZA 1905 ST
The FIANZA 1905ST is a high density PVC Foam (300kg/m3) coated each side with a high performance acrylic adhesive. The acrylic adhesive offers excellent initial and long term bond strength. Our Filmic release liner helps with fast and simple removal over lower standard paper ones. The foam is black in colour so as to blend with most applications*.
1905ST is available in widths to suit all applications from 6mm through to 980mm and thicknesses as standard from 3mm to 12mm. Used as the spacer between insulated glass units and the frame itself during fabrication, 1905ST has been approved by major silicone manufacturers where the main bond is structural silicone adhesive.
Product Technical Data
Product Reference: 1905 ST
Description: Double-sided adhesive on high density PVC Glazing Foam Tape.
Colour: Black
1905 ST has been approved for compatibility with major silicone manufacturers.
General Characteristics
Value
Standard
Resistance of Ageing
90-98% recovery
Resistance to Chemicals
to achieve a positive
waterseal
Adhesive Specification: Open Side
Construction
Type
Thickness (Microns)
Typical Performance Values
Test
Open
Unit
Adhesive Specification: Closed Side
50 um against stainless steel)
Shear Strength
(FINAT TM 8-adhesion of polyester 50 um against stainless steel)
23° C - 400 hours
70°C - 6 hours
Temperature resistance
-40°C + 160°C, short term to 190°C
Resistance to chemicals
When correctly applied, resistant against most solvents, mineral oils, fuels, aliphatic solvents, dilute acids, salts and alkalis.
Application temperature
15°C
Shelf life
1 year (at 20°C and 50% relative humidity)
Note : This product specification is accurate to the best of our knowledge and is intended only as a guide. Since the conditions of use may vary greatly, we can recommend the suitability of products for specific applications but cannot always guarantee them.
Application Guide
As with all tapes and foams, surfaces must be clean, dry free from grease and contamination and as smooth as possible. The adhesive coating is acrylic, so whilst adhesion is gained quickly, this will increase over a 24 hour period. This means making sure the tape is in the right place as repositioning can only take place if done quickly.
Benefits
The main benefits of 1905ST are that it has a low thermal conductivity, it is quick and clean to use with no waste, available in a range of sizes to suit and it is compatible with major silicone manufacturers.
